000 03433nam a22003137a 4500
003 OSt
005 20240320041811.0
008 220811b ||||| |||| 00| 0 eng d
040 _aCvSU-CCAT Campus Library.
_bEnglish.
_cCvSU-CCAT Campus Library.
_erda.
050 _aUM TJ 985
_bA68 2018
100 _aAquino, Ryan Christian S., author.
_96239
245 _aDevelopment of centralized pneumatic controlled device /
_cRyan Christian S. Aquino, Renz Elijah T. Garcia, and Cyrus -Jhonniel C. Quintin.
260 _aRosario, Cavite :
_bCavite State University--CCAT Campus,
_c2018.
300 _axiii, 48 leaves :
_bIllustration :
_c28 cm
500 _aDesign Project (BSIT) Major in Welding and Fabrication Technology--Cavite State University-CCAT Campus, 2018.
504 _aIncludes bibliographical references and appedices.
520 _aAQUINO, RYAN CHRISTIAN S., GARCIA, RENZ ELIJAH T., QUINTIN, CYRUS-JHONNIEL C. Centralized Pneumatic Controlled Device. A Design Project. Bachelor of Science in Industrial Technology. Cavite State University CCAT Campus, Rosario, Cavite.2017. Dr.Lauro B.Pascua. Technical critic: Mr. Jonard A. Almuestro. The study was conducted from March 2017 to May 2018 to develop and evaluate the centralized pneumatic controlled device. Specifically the study aimed to; 1) design a centralized pneumatic controlled device. 2) construct a project that will be a source of compressed air in the welding and fabrication building, that can be used by the teachers, students and by the technical workers in their job. 3) evaluate the functionality of the design project in accordance to the maximum and minimum air pressure distribution per station, the Performance of the Centralized Pneumatic Controlled Device using the following tools; Pneumatic screw driver, Air Gun and Spray Gun. Also the pressure output per period of time using different tools. 4) conduct cost analysis of the project. Centralized pneumatic controlled device was conducted to provide a well regulated and filtered compressed air in the welding and fabrication building that is safe to use in pneumatic tools, the air hoses in every station of the centralized pneumatic controlled device has a length of approximately 10 meters that can be connected in different pneumatic tools using quick coupler. The two (2) air tanks serves as the secondary container of the compress air from the air compressor. The air compressor can store air in its tank at about 800 to 900 psi, while the secondary tank which has two air tanks can store at about 100 to 120 psi. The working pressure that will flow into the pipe line will depend on the air pressure that was stored in the air tanks, when the air tanks has 100 psi the working pressure is 80 psi. The centralized pneumatic controlled device can last 20 minutes while the air compressor is not working or shutdown. The total cost of the project was PHP. 30,827.00.
546 _aIn English text.
650 _aPneumatic tools (Devices).
_96240
650 _aCompressors.
_96241
650 _aPrototype, Engineering.
_95310
650 _aCost analysis.
_95484
700 _aGarcia, Renz Elijah T., author.
_96242
700 _aQuintin, Cyrus-Jhonniel C., author.
_96243
700 _aPascua, Lauro B., adviser.
_95899
700 _aAlmuestro, Jonard A., technical critic.
_94849
942 _cT/M/D
_hTJ 985 A68 2018
_kUM
_2lcc
999 _c1863
_d1863