000 03283nam a22003377a 4500
003 OSt
005 20220810031703.0
008 220809b ||||| |||| 00| 0 eng d
040 _aCvSU-CCAT Campus Library.
_bEnglish.
_cCvSU-CCAT Campus Library.
_erda.
050 _aUM TS227
_bO57 2018
100 _aOnsana, John Jerald P., Author.
_96040
245 _aDevelopment of Positioning Equipment for Oxy-Fuel Gas Cutting Processes /
_cJohn Jerald P. Onsana, Renz Dale D. Padua, and Karl Brian B. Hidalgo.
260 _aRosario, Cavite :
_bCavite State University-CCAT Rosario Campus,
_c2018.
300 _axiv, 78 leaves :
_bIllustrations ;
_c28 cm
500 _aDesign Project (BSIT)with Specialization in Stationary Marine Technology--Cavite State University-CCAT Campus, 2018.
504 _aIncludes bibliographical references and appendices.
520 _aONSANA, JOHN JERALD P.PADUA, RENZ DALE P.AND HIDALGO, KARL BRIAN B. Development of Positioning Equipment for Oxy-Fuel Gas Cutting Processes. Design Project of Bachelor of Science in Industrial Technology with specialization of Stationary Marine Technology, Cavite State University -CCAT Campus, Rosario, Cavite. May 2018. Adviser: Mr. Josefino E. Ambayec. Technical Critic: Mr. Danilo G. Santiago. The study was conducted from August 2017 to May 2018 to develop and evaluate the positioning equipment for oxy-fuel gas cutting processes. Specifically, the study aimed to: 1) design and construct an equipment for oxy-fuel gas cutting processes using locally available materials; 2) evaluate the performance of a positioning equipment for oxy-fuel gas cutting processes in terms of: a) functionality of the positioning equipment for oxy-fuel gas cutting processes; b) speed of cutting work pieces with varying thickness, and c) quality of cut work piece; and 3) conduct a cost analysis for positioning equipment for oxy-fuel gas cutting processes. The developed project was composed of the following major parts:1) adjustable and removable metal holder that served as the holder of the metal to be cut; 2) movable torch holder wherein the torch was attached; 3)funnel type molten metal receiver which will serve as the catcher of the excess molten metal during the cutting process; 4) cabinet wherein the molten metal from the funnel type reservoir will be kept;5)hand pedal which will be used as a controller to move the torch holder; 6) sprocket which was attached in the GI pipe and connected to the hand pedal that will help the machine to move the chain and torch holder; 7) chain which is attached to the sprocket that will assist the hand pedal in moving the torch holder; and8) metal railings that will serve as path of the torch holder to move.
546 _aIn English text.
650 _aOxy-fuel gast cutting.
_96041
650 _aPrototype, Engineering.
_95310
650 _aMaterials.
_91965
650 _aEffectiveness.
_96042
650 _aCost analysis.
_95484
650 _aWelding.
_9732
700 _aHidalgo, Karl Brian B., Author.
_96043
700 _aPadua, Renz Dale B., Author.
_96044
700 _aAmbayec, Josefino E., Adviser.
_95867
700 _aSantiago, Danilo G., Technical Critic.
_96045
942 _cT/M/D
_hTS227 O57 2018
_kUM
_2lcc
999 _c1833
_d1833