Development of Fuel Injector Tester / Melvin L. De Ocampo, Ziara B. Llemos, and Ronniel B. Parin.
Material type:
TextPublisher: Rosario, Cavite : Cavite State university-CCAT Campus, 2018Description: xiv, 73 leaves : illustrations ; 28 cmSubject(s): Fuel injector | Instructional materials | Injectors | Training device | Prototype, engineering | Cost analysisLOC classification: UM TL210 | O23 2018Summary: DE OCAMPO, MELVIN L., LLEMOS, ZIARA B., and PARIN, RONNIELL R., DEVELOPMENT OF FUEL INJECTOR TESTER, Undergraduate Thesis, Bachelor of Science in Industrial Technology. Cavite State University, Rosario, Cavite. March 2017. Adviser. Mr. Ariel G. Santos. Technical critic: Mr. Richard V. Dela Pena.
The study was conducted from July 2015 to March 2017 to develop and evaluate a the fuel injector tester. Specifically,the study aimed to; 1) design and develop a fuel injector tester; 2) construct the device using locally available materials; 3) Evaluate the performance of the device in accordance to its operational limitations and measure the performance to the following test a) break-off pressure; b) operation in spray pattern; c) dribbling operation; 4) conduct cost analysis for the fuel injector tester.
This project was considered to contribute to the Automotive Technology Department an additional training device to help automotive student enhance their skills through actual simulation in hand-on activities and to help automotive instructors acquire a fuel injector tester.
The proponent considered the prototype the first of its kind in the campus to test diesel fuel injectors and to monitor if there was a problem. The fuel injector tester used on the monitoring of fuel spray and obstruction that blocks the flow of fluid inside injectors. The prototype was consist of hydraulic pump that capable of large amount of fluids from reservoir going to the fuel line connected to the injectors that hydraulically operated valve inserted to combustion chamber to metered the fuel. The total cost of the project was PHP. 14,221.00.
| Item type | Current location | Collection | Shelving location | Call number | Copy number | Status | Date due | Barcode |
|---|---|---|---|---|---|---|---|---|
Thesis/Manuscripts/Dissertations
|
Cavite State University - CCAT Campus | Thesis/Manuscript/Dissertation | TH | UM TL210 O23 2018 (Browse shelf) | 1 copy | Available | T0003606 |
Browsing Cavite State University - CCAT Campus shelves, Shelving location: TH, Collection: Thesis/Manuscript/Dissertation Close shelf browser
|
|
|
|
|
|
|
|
||
| UM TL152 P37 2018 Development of Portable Air Cleaning System For Gasoline Engine / | UM TL 158.A43 A73 2021 Delivery system of automotive program in selected universities and colleges : basis for a proposed intervention plan / | UM TL 210 E84 2016 Development of hydraulic bench vise (foot operated) / | UM TL210 O23 2018 Development of Fuel Injector Tester / | UM TL214.C64 D48 2018 Development of Gasoline Engine Trainer / | UM TL214.T87 M34 2018 Development of Analog Tester for Turbocharger and Blow-Off Valve / | UM TL255 J66 2018 Development of Pressurized Brake Bleeder Pump / |
Design Project (BSIT)Major in Automotive Technology--Cavite State University-CCAT Campus, 2018.
Includes bibliographical references and appendices.
DE OCAMPO, MELVIN L., LLEMOS, ZIARA B., and PARIN, RONNIELL R., DEVELOPMENT OF FUEL INJECTOR TESTER, Undergraduate Thesis, Bachelor of Science in Industrial Technology. Cavite State University, Rosario, Cavite. March 2017. Adviser. Mr. Ariel G. Santos. Technical critic: Mr. Richard V. Dela Pena.
The study was conducted from July 2015 to March 2017 to develop and evaluate a the fuel injector tester. Specifically,the study aimed to; 1) design and develop a fuel injector tester; 2) construct the device using locally available materials; 3) Evaluate the performance of the device in accordance to its operational limitations and measure the performance to the following test a) break-off pressure; b) operation in spray pattern; c) dribbling operation; 4) conduct cost analysis for the fuel injector tester.
This project was considered to contribute to the Automotive Technology Department an additional training device to help automotive student enhance their skills through actual simulation in hand-on activities and to help automotive instructors acquire a fuel injector tester.
The proponent considered the prototype the first of its kind in the campus to test diesel fuel injectors and to monitor if there was a problem. The fuel injector tester used on the monitoring of fuel spray and obstruction that blocks the flow of fluid inside injectors. The prototype was consist of hydraulic pump that capable of large amount of fluids from reservoir going to the fuel line connected to the injectors that hydraulically operated valve inserted to combustion chamber to metered the fuel. The total cost of the project was PHP. 14,221.00.
In English text.
There are no comments on this title.